Product Details:
Minimum Order Quantity | 1 Set |
Secondary Seal | Nitrile (NBR) / Viton (FKM) / EPDM / PTFE / TTV / Aflas / Kalrez |
Speed | up to 2 m/s |
Shaft Diameter | up to 25 mm to 200 mm |
Velocity | up to 2 m/s |
Design Pressure | up to 5 bars |
Design Temperature | up to -20O C to +100O C |
Model No. | S17D |
Brand | Gipfel Engineering |
Dry mechanical seal are designed for agitators, mixers, reaction vessels, blowers, fans, etc. wherein shaft drive is located at the top of the vessel. The seat seal face is exposed to the gases / vapors of the product and there is no liquid coming in contact with the seat and face. The dry-running single seal needs no quench and no supply system because there is no need to monitor the pressure and temperature in the areas of application that is why the Seal is called “Dry Seal”.
The externally mounted rotating multiple spring-loaded parts are positioned on the atmosphere side. Dry running Agitator mechanical seal are available with cartridge, non cartridge with & without bearing assembly. Dry running seals design eliminates the need of auxiliary equipment for cooling & lubricating that is required for mixer application. Since there is no use of barrier fluid, thus eliminates the possibility of product contamination.
Features:
Specification:
Application | Pharmaceutical Industries, Chemical Industries, Petrochemical Industries, Food and beverage industries, Non-toxic media, Agitator, Reactor, Mixer, Hydrometallurgy & Biotechnology Etc. | |
Materials | Faces | Carbon / Silicon Carbide / Tungsten Carbide |
Elastomers | Nitrile (NBR) / Viton (FKM) / EPDM / PTFE / TTV / Aflas / Kalrez | |
Hardware | S. S. 304 / S. S. 316 / Hastelloy-B & C / Alloy-20 / Titanium | |
Operating Limits | Size | up to 25 mm to 200 mm |
Pressure | up to 5 bars | |
Temperature | up to -20O C to +100O C | |
Speed | up to 2 m/s | |
Velocity | Up to 2 m/s |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Piece |
Pressure | Vacuum....35bar Vessel pressure +60 bars |
Diameter | up to 20 mm to 200 mm |
Speed | Up to 1 m/s |
Shaft Diameter | 25 mm to 200 mm |
Velocity | up to 2 m/s |
Design Pressure | up to 15 bars |
Design Temperature | up to -20O C to +200O C |
Brand | Gipfel Engineering |
The type S57 is a dual-pressurized, liquid-lubricated double cartridge mechanical seal are designed for top entry, bottom entry & side entry drives mixing and agitating equipment. This seal specially designed for any mixed and pressurized liquid in vessel with top entry agitators where no leakage of highly application or fluids to the environment can be tolerated. Complete pre-assembled tested unit ready for installation. This seal show good performance in high vacuum conditions. A value-engineered design, high level of standardization and broad material options make this seal a cost-efficient solution for general-duty applications in the chemical and pharmaceutical industry. The seal is suitable for operation in potentially explosive atmospheres. Depending on individual explosion protection requirements, the seal operating limits may differ from the values given in the parameters section. Furthermore, additional monitoring devices may be required.
Features:
Specification:
Application | Agitators Seals Are Used In Viscous, Dry & Sticky Fluids In Huge Mixers, Agitators, Reactors, Vessels, Driers For Paints Industry, Chemical Industry, Pharmaceutical Industry, Plastic Industries, Foodstuff Processing, Pulp And Paper Industry, Petrochemicals And Its Vapors, General Chemicals And Its Vapors, Light Hydrocarbons And Its Vapors, Hazardous & Toxic Application, Biochemistry, Polymerization, Electron Epoxy, Power Generation, Chemical Processing, Bulk Drugs, Mills, Autoclaves And All Type Of Clear And Viscous Liquids & Vapors And Especially Suitable For Heavy Pollution And High Suspended Solid Content Process Frequent Vacuum And High Pressure Interchange Equipment’s Etc. | |
Materials | Faces | Carbon / Silicon Carbide / Tungsten Carbide |
Elastomers | Nitrile (NBR) / Viton (FKM) / EPDM / Neoprene / PTFE / TTV / Aflas / Kalrez | |
Hardware | S. S. 304 / S. S. 316 / Hastelloy-B & C / Alloy-20 / Titanium | |
Operating Limits | Size | up to 20 mm to 200 mm |
Pressure | up to 15 bars | |
Temperature | up to -20O C to +200O C | |
Speed | up to 2 m/s |
Additional Information:
Product Details:
Minimum Order Quantity | 1 Set |
Speed | up to 2 m/s |
Shaft Diameter | up to 30 mm to 150 mm |
Material Grade | SS316 |
Elastomers | Nitrile (NBR) / Viton (FKM) / EPDM / PTFE / TTV / Aflas / Kalrez |
Design Pressure | up to 5 bars |
Design Temperature | up to -20O C to +200O C |
Model No. | S50G |
Brand | Gipfel Engineering |
Compact & economical single mechanical seal are designed for top entry drives on glass-lined reaction vessels with a glass-lined agitator shaft. This seal specially designed for any mixed and pressurized liquid in glass lined vessel with top entry agitators where no leakage of highly acidic process gas or fluids to the environment can be tolerated. Complete pre-assembled tested unit ready for installation. This seal show good performance in high vacuum conditions. This seals are available with us in precision design and construction standards.
Features:
Specification:
Application | Pharmaceutical Industries, Chemical Industries, Petrochemical Industries, Plastic Industries, Pulp & Paper Industries, Hazardous & Toxic Application, Hydrometallurgy & Biotechnology, Agitator, Reactor, Mixer, Etc. | |
Materials | Faces | Carbon / Silicon Carbide / Tungsten Carbide |
Elastomers | Nitrile (NBR) / Viton (FKM) / EPDM / PTFE / TTV / Aflas / Kalrez | |
Hardware | S. S. 304 / S. S. 316 / Hastelloy-B & C / Alloy-20 / Titanium | |
Operating Limits | Size | up to 30 mm to 150 mm |
Pressure | up to 5 bars | |
Temperature | up to -20O C to +200O C | |
Speed | up to 2 m/s |
Additional Information: