Product Details:
Minimum Order Quantity | 01 Piece |
Usage/Application | Industrial |
Type | Cartridge Design |
Material | Stainless Steel |
Size | 3/4" to 12" |
Brand | Gipfel Engineering |
Model Name/Number | ES920 |
Speed | 140 RPM |
Shaft Diameter | 20mm to 300mm |
Design Pressure | 7 bar |
Design Temperature | -20 to +200 Deg. C |
Is It Customized | Customized |
I Deal In | New and Second Hand |
Country of Origin | Made in India |
Features;
· Single Seal
· Without Bearing
· External Mounted
· Cartridge Construction
· Metal Free Contact Parts
· Top, Bottom & Side Entry
· Rotary Multiple Spring Type
· Factory Assembled & Tested
· Hydraulically Balance & Un-Balance
· Independent of Direction of Rotation
· Liquid-Lubricated or Cooling Arrangement
· Non-standard sizes, special designs and material options are available on request
Specification;
Application |
Dry & Sticky Fluids In Huge Mixers, Agitators, Reactors, Vessels, Driers For Paint, Chemical, Pharmaceutical, Plastic, Pulp and Paper Industries, Foodstuff Processing, Petrochemicals and it’s Vapors, General Chemicals and it’s Vapors, Light Hydrocarbons and it’s Vapors, Hazardous & Toxic Application, Biochemistry, Polymerization, Electron Epoxy, Power Generation, Bulk Drugs, Mills, Autoclaves and All Type of Clear and Viscous Liquids & Vapors etc. |
|
Materials |
Faces |
Carbon / Silicon Carbide / Tungsten Carbide |
Elastomers |
Viton (FKM) / EPDM / Aflas / PTFE / TTV / Kalrez (FFKM) |
|
Hardware |
SS 304 / SS 316 / Hastelloy-B & C / Alloy-20 / Titanium |
|
Operating Limits |
Size |
20mm to 300mm |
Pressure |
7 bars |
|
Temperature |
-20 to +200 Deg. C |
|
Speed |
140 RPM |
Additional Information:
Product Details:
Minimum Order Quantity | 01 Piece |
Usage/Application | Industrial |
Type | Cartridge Design |
Material | Stainless Steel |
Size | 1/2" to 10" |
Brand | Gipfel Engineering |
Suitable For | Plough Shear Mixer |
Model Name/Number | HS680 |
Speed | 220 RPM |
Shaft Diameter | 20mm to 300mm |
Design Pressure | 20 bars |
Design Temperature | -40 To +220 Deg. C |
Is It Customized | Customized |
I Deal In | New and Second Hand |
Country of Origin | Made in India |
Problems common to sealing slurry process fluids, such as excessive face wear, atmosphere build-up of solids, and lack of flush water seal support, cost you time and money. Gipfel Engineering slurry seals tackle volume and abrasive environments, providing options that will ensure optimum machine performance and reduce your total cost of ownership.
The HS680 slurry seal is able to with stand the motion common to heavy duty slurry-handling centrifugal pumps and other Equipments. There are no dynamic elastomers in the HS680 series to hang up. Constant spring load keep faces closed through axial motion, Radial allowance keeps faces mated.
Dual, balanced, multi-spring pusher, cartridge design, specifically engineered to operate in slurry services where corrosive, toxic or volatile liquids are being handled. Uses a low flow pressurized barrier fluid to provide clean lubrication to the seal faces at a much lower flow rate than single seals equipped with external flushes. Furthermore, the pressurized barrier fluid prevents process liquid from reaching the atmosphere which assures proper environmental and operational safety.
High performance heavy duty slurry seal with low heat generation allow for long lasting performance with minimal cooling required. A wide verity of non-clogging designs allow for optimized design selection and standardization.
Features;
Specification;
Application |
Pulp & Paper, Petrochemical, Pharmaceutical, Oil, Fertilizer, Chemical & Mining Industries, Hard Rock, Mineral Sand Ore & Gold Mining, Iron Ore, Coal & Uranium Processing, Copper, Zinc, Nickel & Alumina Refining, Tailings Disposal, Tar Sand Extraction, Synthetic Rutile, Pigment, Solvent, Steel Making, Power, Potash, Phosphate & Waste Water Treatment Plants, Flue Gas Desulphurization (FGD), Off-Shore Production (Sand/Gravel Oil Extraction), Wet Cement Processing, Bauxite, Iron Ore & Corn Slurries, Vacuum Distillation, Crystallization, Building Services, Hazardous Liquid, Mixer, Biochemistry, & Other Rotary Equipment Etc. |
|
Materials |
Faces |
Silicon Carbide / Tungsten Carbide |
Elastomers |
Viton (FKM) / Aflas / EPR / PTFE / TTV / Kalrez (FFKM) |
|
Hardware |
SS 316 / Hastelloy-B & C / Alloy-20 / Duplex SS / High Chrome Iron / Titanium |
|
Operating Limits |
Size |
20mm To 300mm |
Pressure |
20 bars |
|
Temperature |
-40 To +220 Deg. C |
|
Speed |
2900 RPM |
|
Solids |
60% Maximum solids by weight |
|
Particle Size |
10,000 Micron Maximum |
|
Particle Hardness |
9 MOH Maximum |
Additional Information: