Product Details:
Material | Depend on Media |
Brand | Gipfel Engineering |
Usage/Application | Industrial |
Model No. | WS300 |
Size | 20 mm to 150 mm |
Speed | 2900 RPM |
Shaft Diameter | 20 mm to 150 mm |
Design Pressure | 20 bars |
Design Temperature | -45 to +200 Deg. C |
Country of Origin | Made in India |
This seal is designed with wave spring for handling Clear, Viscous Contaminated Non Corrosive Liquids. This seals can also be used in dirty application as spring clogging does not occur. In addition to this, these series are compact in design with reduced axial length. Torque transmission from retainer shell to seal ring is through drive pin.
Features;
· Single Seal
· Pusher Type
· Internal Mounted
· Wave Spring Loaded
· Suitable for Short Space
· Independent of direction of rotation
· Hydraulically Balanced & Un Balance
Specification;
Application |
Clear, Lubricating, Non Corrosive Liquids, General & Light Chemicals, Light Sewage Water, High Viscosity Fluids, Hydrocarbons, Petrochemicals & Refinery Service Etc. |
|
Materials |
Faces |
Carbon / Silicon Carbide / Tungsten Carbide |
Elastomer |
Nitrile (NBR) / Viton (FKM) / EPDM / Aflas / PTFE / TTV / Kalrez (FFKM) |
|
Hardware |
SS 304 / SS 316 / Hastelloy - C / Alloy - 20 / Titanium |
|
Operating Limits |
Size |
20 mm to 150 mm |
Pressure |
20 bars |
|
Temperature |
-45 to +200Deg. C |
|
Speed |
2900 RPM |
Additional Information:
Product Details:
Material | Depend on Media |
Usage/Application | Industrial |
Size | 20 mm to 150 mm |
Pressure | 12 bar |
Temperature | -45 to +200 Deg. C |
Country of Origin | Made in India |
This seal is designed with wave spring for handling Clear, Viscous Contaminated Non Corrosive Liquids. This seals can also be used in dirty application as spring clogging does not occur. In addition to this, this series are compact in design with reduced axial length. Torque transmission from retainer shell to seal ring is through drive pin.
We also provide tailor-made solution for all our products as per the demands and requirements of customers.
Features;
· Single Seal
· Pusher Type
· Internal Mounted
· Wave Spring Loaded
· Suitable for Short Space
· Independent of direction of rotation
· Hydraulically Balanced & Un Balance
Specification;
Application |
Clear, Lubricating, Non Corrosive Liquids, General & Light Chemicals, Light Abrasive Slurry, Light Sewage Water, High Viscosity Fluids, Hydrocarbons, Petrochemicals & Refinery Service Etc. |
|
Materials |
Faces |
Carbon / Ceramic / Silicon Carbide / Tungsten Carbide |
Elastomer |
Nitrile (NBR) / Viton (FKM) / EPDM / Aflas / PTFE / TTV / Kalrez (FFKM) |
|
Hardware |
SS 304 / SS 316 / Hastelloy - C / Alloy - 20 / Titanium |
|
Operating Limits |
Size |
20 mm to 150 mm |
Pressure |
12 bars |
|
Temperature |
-45Deg. to +180 Deg. C |
|
Speed |
2900 RPM |
Additional Information:
Product Details:
Material | Equivalent to Eagle Burgmann HJ92N Type |
Usage/Application | Industrial |
Model No. | WS320 |
Speed | 2900 RPM |
Shaft Diameter | 20 mm to 100 mm |
Design Pressure | 22 bar |
Design Temperature | -45 to +180 Deg. C |
Country of Origin | Made in India |
This Seal is designed with wave spring for media containing solids or with high viscosity e.g. sugar, paper, sewage and waste water industry. This seals can also be used in dirty application as spring clogging does not occur. The springs are product protected. There is no sticking or clogging keep faces in contact. In addition to this, these series are compact in design with reduced axial length. Torque transmission from retainer shell to seal ring is through drive pin.
Features;
· Single Seal
· Pusher Type
· Internal Mounted
· Wave Spring Loaded
· Suitable for Short Space
· Springs are outside the Media
· Independent of direction of rotation
· Hydraulically Balanced & Un Balanceed
Specification;
Application |
Light Abrasive Slurry, Light Sewage Water, High Viscosity Fluids, Hydrocarbons, Petrochemicals & Refinery Service Etc. |
|
Materials |
Faces |
Carbon / Ceramic / Silicon Carbide / Tungsten Carbide |
Elastomer |
Nitrile (NBR) / Viton (FKM) / EPDM / Aflas / PTFE / TTV / Kalrez (FFKM) |
|
Hardware |
SS 304 / SS 316 / Hastelloy - C / Alloy - 20 / Titanium |
|
Operating Limits |
Size |
20 mm to 100 mm |
Pressure |
22 bars |
|
Temperature |
-45 Deg. to +180 Deg. C |
|
Speed |
2900 RPM |
Additional Information: